PLANET UMG-2000 - Manual (Page 62)

62
8.5 IP PBX Channel Setting
The PBX “Channels” allows the administrator to see the list of the PSTN card.
Hardware Type
This section lists the channels of PSTN Card. The UMG-2000 will show from Channel 1 ~
Channel 4, the UMG-2100 will show from Channel 1 ~ Channel 8.
Channels Forward
This section lists the settings of the caller ID.
Name: Specifies the call name that will be shown to the call receiver.
Number: Specifies the call number that will be shown to the call receiver.
The administrator can choose a channel as a voice or a data channel by clicking
the corresponding “right” button or removing a channel from the existing
list by clicking the corresponding “left” button.
Channels setting
This section set the channel, call ID and related extension. This means that the related
channel will just response the related call number and extension.
The PBX “Channels” allows the administrator to see the list of the T1/E1 card.