Connect your pc to the processor – ProSoft Technology MVI69-DNPSNET User Manual
Page 16
Advertising
MVI69-DNPSNET ♦ CompactLogix or MicroLogix Platform
Start Here
Distributed Network Protocol Interface Module
Page 16 of 119
ProSoft Technology, Inc.
November 3, 2008
1.6
Connect your PC to the Processor
1 Connect the right-angle connector end of the cable to your controller at the
communications port.
2 Connect the straight connector end of the cable to the serial port on your
computer.
Advertising
This manual is related to the following products: