Eltax AVR-900 - Manual (Page 4)

4
IMPORTANT SAFETY INSTRUCTION
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1. READ AND FOLLOW INSTRUCTIONS: All the safety and operation instructions should be read before the
product is operated. Follow all operation instructions within this manual.
2. RETAIN INSTRUCTIONS: The safety and operation instructions should be retained for future reference.
3. HEED WARNINGS: Comply with all warnings on the product and in the operation instructions.
4. CLEANING: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
5. GROUNDING or POLARIZATION: This product may be equipped with a polarized alternating current line plug
(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician since it is likely you have an out of sate wall socket. Never force the plug into the socket.
6. OVERLOADING: Do not overload wall outlets or extension cords as this can result in
the risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power
cables, damaged or cracked wire insulation, and broken plugs are dangerous. They may
result in electric shock or fire hazard. Periodically examine the power cable - if its
appearance indicates damage or deteriorated receptacles have it replaced by your service
technician.
7. POWER SOURCES: This product should be operated only from the type of power source indicated on the rear
panel label. If you are not sure of the type of power supply to your home, consult your product dealer or local power
company. For products intend to be operated from battery power, or other sources, refer to the operation instructions.
8. ACCESSORIES: Do not place this product on an unstable surface or support. The product
may fall, causing serious injury to a child or adult as well as serious damage to the product.
Any mounting of the product should follow the manufacture’s instructions and use a mounting
accessory recommended by the manufacturer. A product and cart combination should be
moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and
cart combination to overturn.
9. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure
the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static
charges. The example below is for reference only. Correct grounding should always be installed by an electrician.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-21)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250.PART H)
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
10. POWER-CORD PROTECTION: The power supply cables should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cables at plugs and the
point where they exit from the product.
11. ATTACHMENTS: Do not use unauthorized attachments as they may cause faults with the unit.
12. CONDITIONS REQUIREING SERVICE: Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a) If the unit exhibits sudden unusual operation or unusual display characteristics.