Getting started – ZTE T84/Telstra Tough Max User Manual

Page 3

Advertising
background image

3

GETTING STARTED


INSERT YOUR SIM CARD
This device only supports micro SIM or 3FF size. Do not use a nano SIM (4FF)
or nano SIM adaptor card which can damage your device.

1.

Open the SIM slot cover on the right hand side of the device by lifting the

port cover up from the bottom (shown above).

2.

Hold the SIM card with the cut corner as shown below and push it fully

into the SIM slot until it clicks and locks into place.

3.

Make sure to fully close the SIM slot cover to maintain water protection

integrity.



INSTALL A MICRO SD CARD (OPTIONAL)
A microSD card can be installed or removed while the phone is turned on. You
need to unmount the microSD card before removing it. The device supports
microSD(HC) cards up to 32GB. Insert as shown below:

Advertising