Canon PowerShot SX410 IS User Manual
Page 94
Advertising
94
ç
Contents
4
Join the subjects in the shooting
area and look at the camera.
●
After the camera detects a new
face, the lamp blinking and
self-timer sound will speed up.
(When the flash fires, the lamp
will remain lit.) About two seconds
later, the camera will shoot.
●
To cancel shooting after you have
triggered the self-timer, press the
[
] button.
●
Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
●
To change the number of shots, after choosing [ ] in step 1,
press the [
] button, press the [ ][ ] buttons to choose the
number of shots, and then press the [
] button again. [Blink
Detection] (= 77) is only available for the final shot.
Advertising