Philips AVENT SCF875/01 - Manual (Page 12)

14
ENGLISH
7
If you have not yet filled the water tank with water for steaming, refer to
the chapter “Filling the water tank” and add water to the water tank before
putting the jar on the main unit.
Note
• Make sure the water tank lid is correctly locked in place before placing the jar
on the main unit.
8
Flip the jar over with the jar lid on the bottom (Fig. n).
9
Align the connector on the jar lid to the locking area on the water tank, and
then place the jar on the main unit with the jar lid on the bottom (Fig.
o).
Press the jar downwards to lock it firmly on the main unit, and make sure the
handle is on the right-hand side.
10
If the control knob is not in the off position ( OFF), turn it to the off position
first.
11
Plug in the appliance.
12
Turn the control knob to select the steaming time you need (Fig. p). Refer
to the table in the chapter “Ingredients and steaming time” and the recipe
booklet for the recommended steaming time.
» The steaming light will turn white to indicate that the appliance is
steaming.
» When the steaming cycle is finished, the appliance will beep and the
steaming light will go out.
13
Turn the control knob back to the off position ( OFF) (Fig. q). Wait 2 minutes,
or until there is no more steam coming from the top of the appliance before
removing the jar.
Caution
• If you intend to start another steaming cycle, let the appliance cool down for
10 minutes, and empty any remaining water out of the water tank before you
refill and start a new steaming cycle.
14
To blend the steamed ingredients, refer to chapter “Blending after steaming”.
15
There may still be some water remaining in the water tank after a steaming
cycle. This is normal. Wait until the appliance cools down to room
temperature, then empty the water tank of all residual water. To empty or
clean the water tank, refer to the chapter “Cleaning and descaling”.