MIDEA MWA12CR71 - Manual (Page 10)


Page 10

Oper
ating
Ins
tructions
(UP/DOWN) Button
Press or hold either left ( - ) or right ( + )
button until the desired temperature is
seen on the display. This temperature will
be automatically maintained at the set
temperature, between 62°F (17°C) and
86°F (30°C). If you want the display to
read the actual room temperature, see
“To Operate on Fan Only” section.
(MODE) Button
• To choose operating mode, press
Mode button. Each time you press
the button, a mode is selected in a
sequence that goes from Auto, Cool,
Dry and Fan. The indicator light beside
will be illuminated and remains on once
the mode is selected.
• The unit will initiate automatically the
Energy Saver function under Cool, Dry,
Auto (only Auto-Cooling and Auto-
Fan) modes.
Operating on AUTO m ode:
• When you set the air conditioner in
AUTO mode, it will automatically select
cooling, heating (selected models only)
or fan only operation depending on what
temperature you have selected and the
room temperature.
• The air conditioner will control room
temperature automatically to hit the
temperature set point you choose.
• In this mode, the fan speed cannot be
adjusted, it starts automatically at a speed
according to the room temperature.
Operating on FAN m ode:
• Use this function only when cooling
is not desired, such as for room air
circulation or to exhaust stale air (on
some models). (Remember to open
the vent during this function, but keep
it closed during cooling for maximum
cooling efficiency.) You can choose any
fan speed you prefer.
• During this function, the display will
show the actual room temperature, not
the set temperature as in the cooling
mode.
• In Fan only mode, the temperature can
not be adjusted.
Operating on DRY m ode:
• In this mode, the air conditioner will
operate in the form of a dehumidifier.
Since the conditioned space is a closed
or sealed area, some degree of cooling
will continue.
(FAN SPEED) Button
Used to select the Fan Speed in four steps
- Auto, Low, Med or High. Each time the
button is pressed, the fan speed mode
is shifted. On Dry mode,the fan speed is
controlled at low automatically.
Auto
Timer
Energy
Saver Power
Button
LED
Display
Sleep
Mode
Check
Filter Fan
Speed Remote
Signal
Receptor
Temp/Timer
Control
Mode
Selector
Temp/Timer
Control