MIDEA MWA12CR71 - Manual (Page 6)


Page 6

The power supply cord contains a current device that senses damage to the power
cord. To test your power supply cord as follows:
1. Plug in the air conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST
button, you will notice a click as the RESET button pops out.
3. Press the RESET button, again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products
this it also indicated by a light on the plug head.)
Saf
ety
Pr
ecautions
NOTES
• Do not use this device to turn the unit on or off.
• Always m ake sure the RESET button is pushed in for correct operation.
• The power supply m ust be replaced if it fails reset when either the TEST button is
pushed, or it can not be reset. Please contact Custo m er Service.
• If power supply cord is da m aged, it can not be repaired. It MUST be replaced with
a new cord - please contact Custo m er Service.
Operation of Current Device