Roland V-1200HDR Control Surface for the V-1200HD Video Switcher - Manual (Page 13)

13
Appendices
Troubleshooting
Problem Cause Action Page
The V-1200HD cannot be
controlled from the unit.
Are multiple V-1200HDR units or computers installed
with V-1200HD RCS remote-control software
connected?
When connecting multiple V-1200HDR units or computers (V-1200HD RCS), set a
different ID value on each device.
Remote control of V-1200HD units is not possible when ID is set to the same value
on two devices.
Go to the ROOT MENU screen and select PROCESSOR <SETUP>
g CONTROL
SURFACE SETUP screen g “ID”, and change the setting.
-
Is the LINK indicator on the top panel dark? Connect the unit and the V-1200HD correctly. p. 8
A USB flash drive cannot
be read.
Was the USB flash drive formatted on the V-1200HD?
When you’re using a USB flash drive for the first time, be sure to format it on the
V-1200HD. For details, refer to the V-1200HD Owner’s Manual.
-
Was a non-Roland USB flash drive used?
Operation of non-Roland USB flash drives cannot be assured.
Operation has been tested for commonly available USB flash drives, but operation
with all USB flash drives is not assured. Depending on the manufacturer and type of
the USB flash drive, correct operation may not be possible.
-
Main Specifications
Roland V-1200HDR: Control Surface
Display 7 inch 800 x 480 Graphic color LCD (touch screen) x 2
Power Supply
AC Adaptor, DC 9 V to 16 V (XLR-4-32 type)
* Can not be used at the same time.
Power Consumption 36 W
-Operation
Temperature
+0 to +40 degrees Celsius
+32 to +104 degrees Fahrenheit
Dimensions
520 (W) x 237 (D) x 111 (H) mm
20-1/2 (W) x 9-3/8 (D) x 4-3/8 (H) inches
* Protruding parts not included.
Weight
4.3 kg
9 lbs 8 oz
Accessories AC Adaptor,Owner’s Manual
Video inputs
HDMI (type A) x 2 * 1920 x 1080/60p, 59.94p, 59.94i, 50p, 50i
* HDCP Supported
Video output HDMI (type A) x 1 * Use for future expansion
Others
USB: Type A x 1 * USB Memory
USB: Type B x 1 * Use for future expansion
LAN: RJ45 100Base-TX (Connect to V-1200HD)
PHONES jack: Stereo 1/4-inch phone type x 1
(80 mW + 80 mW, 32 ohms)
Internal speakers (stereo)
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
Dimensions
Unit : mm
99
106
5
237
514
520