Configuring the settings (uvc-02 setup tool) – Roland Web Presentation Dock User Manual
Page 12
Advertising
12
Configuring the Settings (UVC-02 Setup Tool)
4
Unplug the USB cable.
The power to the UVC-02 is turned off.
5
Reconnect the USB cable after a while (about five
seconds).
The UVC-02 restarts, and a screen like the one below appears in the
Setup Tool.
6
To revert to the previous settings before updating, click
“YES”; and if you don’t need to revert, click “NO”.
You can save your settings to a file even if you’ve selected “NO”.
Advertising