Edimax Technology PS-1206MF - Manual (Page 21)

10
4. MFP Manager in MAC
4.1 MFP Server List
The “MFP Manager” can automatically find the MFP Server in the network and
show it in the MFP Server List. You can select an all-in-one printer and click
“Connect” to use the printer as if you had directly connected the printer to your
computer through a USB cable. The MFP manager also displays information
about the connection status.
When you don’t want to use the all-in-one printer, please click “Disconnect” so
that other users can use the device. If you forget to disconnect the all-in-one
printer, the MFP Server will be disconnected after five minutes automatically.
You can configure the time period; please refer to the description in the
following table.
If you unplug the USB cable or turn off the all-in-one printer, the device will not
display in the list. After you reconnect the USB cable or turn on the all-in-one
printer, you have to click the “Refresh” and “Connect” buttons in the “MFP
Manager” to recover the connection.