Edimax Technology PS-1206MF - Manual (Page 32)

21
5.5 TCP/IP Configuration
Double click the “TCP/IP” button. The TCP/IP configuration window will pop up.
You can configure the MFP Server to automatically get an IP address from a
DHCP server or manually specify a static IP.
IP Address Assignment:
If you need the MFP Server to automatically get an IP from a DHCP server,
select “Auto IP”. You also can select “Static IP” to manually assign “IP Address”,
“Subnet Mask” and “Gateway” for the MFP Server. The default IP Address
settings of the MFP Server are as follows.
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Auto IP – The IP Address information of the MFP Server obtained from a
DHCP Server will be displayed in the address field. If no DHCP Server is
present, you have to assign the information manually.
Static IP – Manually assign the IP address information in the same network
with your computer to the MFP Server.