Edimax Technology PS-1206MF - Manual (Page 45)

34
6.4 Setup Wizard
Note: You can configure the MFP Server from the Setup Wizard. To let the
changes take effect, you have to click “Save Settings” in the menu on the left
side to reboot the MFP Server.
6.4.1 System
6.4.1.1 Admin Password
You can change the MFP Server name and port name from here.
MFP Server Name: the name of the MFP Server. You can use this name to
identify the MFP server when you are searching for if using by the “Server
Manager” utilities.
PORT Name: The name of the port which MFP server plugs on. The default
port name is ‘’p1’’.