Roland JUPITER-Xm Portable Synthesizer User Manual
Page 21
JUPITER-Xm Owner's Manual Ver. 1.5 and later
21
Exporting scenes
You can export the scene data to an SVD file.
1.
Press the
[MENU] button
.
2.
Use the
[1] knob
to select
“UTILITY,”
and then press the
[ENTER] button
.
You can also make this selection by using the
PAGE [
д
] [
е
] buttons
instead of the
[1] knobs
.
3.
Use the
[1] knob
to select
“IMPORT/EXPORT,”
and then press
the
[ENTER] button
.
4.
Use the
[1] knob
to select
“EXPORT SCENE,”
and then press
the
[ENTER] button
.
5.
Use the
[1] knob
to select where to export the scene from,
and press the
[ENTER] button
to select it with a check mark.
6.
Press the
PAGE [>] button
.
7.
Move the cursor using the
PAGE [<] [>] buttons
, and use the
[2] knob
to edit the characters.
8.
Once you’ve entered the filename, press the
[ENTER]
button
.
A confirmation message appears.
If you decide to cancel, press the
[EXIT] button
.
9.
To execute, use the
[2] knob
to select
“OK,”
and then press
the
[ENTER] button
.
The scenes will be exported to the
“ROLAND/SOUND”
folder on
your USB flash drive.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the
“Executing…”
display is shown.
Exporting a step edit pattern
Here’s how a step edit pattern in the scene can be exported to a USB
flash drive as MIDI data (SMF).
1.
Press the
[MENU] button
.
2.
Use the
[1] knob
to select
“UTILITY,”
and then press the
[ENTER] button
.
You can also make this selection by using the
PAGE [
д
] [
е
] buttons
instead of the
[1] knobs
.
3.
Use the
[1] knob
to select
“IMPORT/EXPORT,”
and then press
the
[ENTER] button
.
4.
Use the
[1] knob
to select
“EXPORT USER PATTERN,”
and
then press the
[ENTER] button
.
5.
Use the
PAGE [<] [>] buttons
to move the cursor, and use
the
[2] knob
to change the character.
6.
When you’ve specified the file name, press the
[ENTER]
button
.
A confirmation message appears.
If you decide to cancel, press the
[EXIT] button
.
7.
To execute, use the
[2] knob
to select
“OK,”
and then press
the
[ENTER] button
.
The data is exported to the EXPORT folder of the USB flash drive.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the
“Executing…”
display is shown.