Samson MediaOne M50 Powered Studio Monitors (Pair) - Manual (Page 7)

MediaOne M50 7
ENGLISH
FRANÇAIS
DEUTSCHE
ESP
AÑOL
IT
ALIANO
Adding an Active Subwoofer
Adding a subwoofer to extend the low
frequency response of your monitor
system can be beneficial when mixing
your music. Typically, it is best to set
the subwoofer level to be equal to that
of the main speakers.
Because deep-bass frequencies are
non-directional, it is difficult for our
ears to locate the sound source, and
the precise placement of the subwoofer
is not as critical as the main speakers.
The ideal location is between the two
main speakers. If you notice there are
frequencies that sound quieter than
others, move the subwoofer slightly to
the left or right.
To add a powered subwoofer to your MediaOne M50 speakers to create a 2.1 system:
• Connect your audio source to the
left and right RCA Inputs of the
MediaOne M50.
• Connect the MediaOne M50
1/8” STEREO / SUB Output to
the left and right line inputs of
your active subwoofer.
• Play music from your audio
source.
• Turn up your MediaOne M50 to
your desired listening level.
• Turn up the level of the
subwoofer to desired level.
Note: The MediaOne M50 front panel
Volume control will control the level of
the entire system.
SUBWOOFER
From Audio Source