Sony XDCA-FX9 Extension Unit for PXW-FX9 Camera - Manual (Page 116)

116
File Transfer
File transfer
settings
Auto Upload (Proxy)
On / Off
Turns proxy file auto transfer on/off.
Auto Upload Server Selects the auto upload server for proxy files.
Displays the display name configured in Server
Settings(NCM) and Server Settings1 to Server Settings3.
Clear Completed Jobs
Execute / Cancel
Clears completed transfer jobs from the list.
Execute: Execute function.
Clear All Jobs
Execute / Cancel
Clears all transfer jobs from the list.
Execute: Execute function.
Server Settings(NCM) Displays the display name of the NCM server and the service
(CCM) (display only).
Server Settings1
Display Name Sets the display name shown in the transfer destination setup
menu.
Service
FTP
Displays the type of server (display only).
Host Name Sets the address of the transfer destination server.
Host name or IP address
Port (1 to 65535 ( 21 )) Sets the port number of the transfer destination server.
User Name Sets the user name for authentication of the transfer
destination server connection.
Password Sets the authentication password of the transfer destination
server connection.
Passive Mode
On / Off
Turns PASV mode on/off.
Destination Directory Enter the directory on the transfer destination server.
Using Secure Protocol
On / Off
Sets whether to use (On) or not use (Off) secure FTP transfer
(FTPS Explicit mode: FTPES).
Root Certificate
Load / Clear / None
Loads a root certificate for secure FTP transfer and clears
settings.
Root Certificate Status
Loaded / No Certificate
Displays the root certificate loading status for secure FTP
transfer.
Reset
Execute / Cancel
Resets the settings of Server Settings to the defaults.
Execute: Execute function.
Server Settings2 Same as Server Settings1.
Server Settings3 Same as Server Settings1.
Network
Item Sub-items and Settings Description