Sony Vario-Tessar T* E 16-70mm f/4 ZA OSS Lens - Manual (Page 50)

GB 50
Maintenance
1
Remove the air filter according to “Cleaning
the Outer Panel/Air Filter of the Projector”
(page 48).
2
Attach a new air filter to the air filter cover so
that the pull stick protrudes outwards from the
air filter cover.
Attach so that there is no gap between the air
filter and air filter cover.
 When attaching the air filter to the air filter cover,
ensure that the pull stick side of the air filter is on
the opposite side of the air filter cover handle. Also,
ensure that the surface with the pull stick is facing
up.
 Securely attach the air filter to the air filter cover,
taking care not to hit the hook of the air filter cover.
If the air filter is attached to the air filter cover
incorrectly, this may cause a malfunction.
3
Attach the air filter cover to the projector.
Fully push it in so that there is no gap between
the air filter cover and the outer panel surface
of the projector.
Follow the laws and regulations of your country or
region when disposing the air filter.
Materials
 Air filter (white part): PP, PET
 Cushion (black part): NBR
Notes
Air filter cover handle
Pull stick