Sony PCK-LG3 Glass Screen Protector for a7R V - Manual (Page 14)

14
Operation Using the Supplied
Infrared Remote Commander
Pan/Tilt and Zoom
Operation
Panning and Tilting
1
Press the POWER switch.
The camera will turn on and perform the pan/tilt reset
operation automatically.
2
Press the arrow button to pan or tilt the camera.
While checking the picture on the screen, press the
desired arrow button.
To move the camera little by little, press the button
just for a moment.
To move the camera in a wide range, press and hold
the button.
To move the camera diagonally, press the B or b
button while holding down the V or v button.
To face the camera back to the front
Press the HOME button.
If the camera moves in a different direction from
the one you intended
The camera is preset so that the image output from the
camera is rotated toward the right whenever you press the
b button.
To face the camera toward the opposite
direction
You might wish to face the camera toward the opposite
direction from that of the button you pressed, for
example, when you change the direction of the camera
while checking the picture on the screen. In such a case,
press the 2 (REV) button while holding down the L/R
DIRECTION SET button.
To reset the setting
To reset the setting, press the 1 (STD) button while holding down
the L/R DIRECTION SET button.
The setting above only changes the signal emitted from
the infrared remote commander, and does not change the
setting of the camera itself. Therefore, repeat the setting
for each infrared remote commander if you are using
more than one infrared remote commander.
When the STANDBY lamp is blinking
If the camera is moved forcibly, or a finger or other object
interferes with camera movement, the camera may fail to
memorize the pan/tilt position.
Press the PAN-TILT RESET button to reset the pan/tilt
position.
CAMERA SELECT
REV
PAN-TILT
RESET
HOME
STD
L/R DIRECTION
SET
1
2
Arrow button Movement of the
camera
Setting
Arrow button Movement of the
camera
Setting
Note
While holding
down
Press
While holding
down
Press
The STANDBY lamp blinks.