Emprex PD-7001 - Manual (Page 15)

System Setup Menu
3. The Display Mode item can only be modified when the TV Display mode is set to
4:3. Two options are provided: Letterbox and Panscan.
Ø Panscan: This image option refers to pictures where the left and right edges of the
picture are cut off so it fills the whole screen. It is selected for the normal TV set
display. This mode is selected when the picture is displayed in panoramic view
and complete scan format.
1.You will first see the picture as shown on the below side after you enter the
AUDIO. For language code, refer to Appendix2.
Letterbox : This image option will display the panoramic frame movie in the sm-
aller portion of the screen. And the movie might appear with black bars at the top
and bottom of the screen. Ø
Bitstream: Select this option when the unit is connected to an amplifier with a
builtin DTS decoder, Dolby Digital decoder and MPEG decoder,or other audio
equipment with digital audio output terminals.
Ш
24 25
Ш
2.
TV Aspect: Depending on the type of television you have, the image adjustment
offers 2 options for your setting: 4:3 and 16:9.This item is used to display image
data in the wide-screen film on the normal TV set. The option 16:9 is used when
the DVD player is connected to wide screen TV in Full Mode, and the screen will
display pictures in full size.
PCM: Select this option when the unit is connected to the dual stereo digital au-
dio equipment. When the DVD disc being played is recorded with the dolby digtal,
MPEG1/MPEG2 recording systems, the DVD player selects PCM as the audio
output.
2.The Dolby Digital option allows you to toggle the Dolby Digital output On/Off.
Two options are provided: Bitstream and PCM. The DTS indicates the output
mode of the Digital Cinema.
TV Output AUTO
4.TV Output is used to switch TV system when you need . Here provide PAL, AUTO, and
NTSC. When connect to TV set, choose TV system according to actual situation until
get satisfied picture. In defect mode, choose NTSC.