Emprex PD-7001 - Manual (Page 16)

System Setup Menu
2.
¡ы ¡ъ ¡э ¡ь
Ш
Ш
Ш
Ш
26 27
Digital Output
48KHz
96KHz
The Rating item is used to set the rating level.
Before you enter into the item, the system will request you to input the password
first. After the password is entered correctly, the parental control rating level can
be changed.
If you did not set any password for Parental Control, the system will request you
to input a new password.
If you make a mistake before pressing Enter, press Clear and enter your 4-digit
password again.
After the new password is entered successfully, press Up/ Down to change
the parental control rating level. Including the Unlock level, there are a total of
9 levels in the parental control rating levels. See the Parental Control section
for details.
3.The Sample Freq provides 2 options. If the connected receiver or amplifier is no cap-
able of processing digital input with a sampling frequency of 96khz, it will select 48khz
as the sampling frequency to compress the signal to a standard signal. After the 48khz
frequency is selected, the unit will automatically convert 96khz signals into 48khz sig-
nals, and then your system will be able to decode the signals. If the receiver is capa-
ble of outputting digital signals with a sampling frequency of 96khz, it will select 96khz
as the output signal. After 96khz frequency is selected, the unit will be able to process
all signals without any compression.
4.The Digital output option is used to turn the Dolby Digital/DTS/Sample Freq. On/Off.
1.You will see the screen illustrated below upon entering the Lock Setup Menu.
This page is used to set the Parental Control.