Lenovo D27-40 27" Monitor - Manual (Page 26)

3-6 D27-40 LCD Monitor User’s Guide
Installing the monitor driver in Windows 11
To use the Plug and Play feature in Microsoft Windows 11, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot into
Windows 11 operating system.
4. From the Lenovo website http://support.lenovo.com/docs/d27_40, find the corresponding
monitor driver and download it to a PC to which this monitor is connected (such as a
desktop).
5. On the Desktop, move mouse to bottom-center of screen, right-click “ Start ” , then click
“ device manager ”
6. Find the “ monitor ” icon and click.
7. Right-click the” Generic PnP monitor ”
8. Click Update Driver, then click Browse the computer to find the driver program.
9. Select “ Let me pick from a list of device drivers on my computer ”.
10. Click the Have Disk button. By clicking the Browse button, browse and point to the
following path:
X:\Monitor Drivers\Windows 11
(where X indicates "the folder in which the downloaded driver is located" (such as a
desktop)
11. Select the “ D27-40.inf ” file and click the Open button. Click the OK button.
12. In the new window, select Lenovo D 27-40 and click Next.
13. After the installation is complete, delete all downloaded files and close all windows.
14. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at
a refresh rate of 60 Hz.