Sennheiser MOMENTUM True Wireless 3 Noise-Canceling In-Ear Headphones (Graphite) - Manual (Page 19)

Using the earbuds
MOMENTUM True Wireless 3 | 19
Connecting the earbuds to a Bluetooth
device
To be able to use the Bluetooth wireless connection, you must regis-
ter both devices (earbuds and e.g. smartphone) via the device set-
tings of your smartphone. This process is called pairing.
If operation differs from the steps mentioned, also refer to the
instruction manual of the Bluetooth device you are using.
Information on the Bluetooth wireless
connection
The earbuds are compatible with Bluetooth 5.2.
If your audio source supports one of the following high-resolution
audio encoding methods, music is automatically played in high audio
quality: aptX®, aptX adaptive® or AAC. Otherwise the headphones
will play your music in normal audio quality (SBC). The used audio
coding is displayed via the Smart Control app.
Paired devices establish the Bluetooth wireless connection immedi-
ately after switch-on and are ready for use.
When you switch on the earbuds, they automatically try to connect
to the last connected Bluetooth device. The earbuds can save the
connection profiles of up to six Bluetooth devices with which they
have been paired. Audio playback is only possible from one device at
a time.
If you pair the earbuds with the seventh Bluetooth device, the saved
connection profile of the least used Bluetooth device will be over-
written. If you want to re-establish a connection with the overwritten
Bluetooth device, you have to pair the earbuds again.
Using the Smart Control app, you can view the list of paired devices
and selectively connect and disconnect devices (“Connections”; >
21).
When you switch on the earbuds for the first time after initial
charging, they automatically switch to Bluetooth pairing mode.
1
2
3
4
5
6