Enviro Bistro 4500 C-10124 - Manual (Page 29)

Warranty
Limited Lifetime Warranty
Covers manufacturer’s defects on exterior stainless steel components, namely the cart panelling & doors, the hood,
condiment bins and handles against perforation (excluding surface corrosion); for part replacement or repair and
labour for the first year and part replacement from then on to the original purchaser. It also covers the stainless
steel burners for part replacement or repair and labour for the first year and part replacement from then on to the
original purchaser.
10 Year Warranty
Covers manufacturer’s defects on steel components, namely the cart, panelling & doors, the hood, condiment bins
and handles, against manufacturers defect; for part replacement or repair and labour for the first year and part
replacement for the remainder of the ten years to the original purchaser. It also covers manufacturer’s defects on
manifold and valves, knobs and burner housing, for part replacement or repair and labour for the first year and part
replacement for the remainder of the ten years to the original purchaser.
5 Year Warranty
Covers manufacturer’s defects on axle, hinges, magnets etc.; for part replacement or repair and labour for the first
year and part replacement for the remainder of the five years to the original purchaser.
1 Year Warranty
Covers manufacturer’s defects on painted surfaces, Rotisserie, Electronic ignition system, Casters and Wheels
Porcelain coating on cooking grills and griddle and all remaining parts for part replacement or repair and labour for
the first year to the original purchaser.
Exclusions
Sear Plates are not covered by this warranty.
Labour: costs are controlled. Please see the Schedule of warranty labour rates sheet.
All materials if damage is caused by scratching, marring, abrasive cleaners, over-firing, grease pan fire, commercial
use, surface corrosion, misuse, lack of maintenance and any discoloration due to heat or with age. On painted steel
surfaces, any surface corrosion should be removed and all surfaces coated to prevent further corrosion, as part of
a normal maintenance procedure. Failure to do so will result in loss of any further warranty on these parts.
29