DJI Ronin 4D 4-Axis Cinema Camera 8K Combo Kit - Manual (Page 3)

EN
2 © 2021 DJI OSMO All Rights Reserved.
DJI Ronin 4D Quick Start Guide
Roll Lock
Tilt Lock
Installation
A. Mounting the Lens (Using DL Lens as an example)
1. The gimbal is folded by default. Unfold the roll and tilt axes before mounting the lens. Toggle the roll axis lock to the unlocked position,
adjust the roll axis as shown, and lock the roll axis. Toggle the tilt axis lock to the unlocked position, adjust the tilt axis as shown, and
lock the tilt axis.
2. Press and hold the release button and rotate the DL
mount body cap counter-clockwise to remove.
3. Align the red marks on the lens and the DL mount. Insert and
rotate the lens clockwise until there is a clicking sound.
3 1
2
4 6
5
1
2
1
2
Click Click