Planar Systems Simplicity Series SLM50 50" UHD 4K Commercial Monitor - Manual (Page 11)

Introduction
Planar Simplicity M Series User Manual
020-1409-00D
Page | 11
4. VESA Mounts, General Description
VESA mounts are used to secure the Planar Simplicity M Series display. The display can be
installed using a variety of VESA mounts available through Planar. If you do not have a VESA
mount, and would like to purchase one, contact Planar.
If you purchased a VESA mount, you should have a received a separate box with mounting
supplies and an installation manual. Follow these instructions carefully.
Caution: Shorter screws will result in insufficient mounting strength and longer screws could
puncture parts inside the display. The device may fall, causing serious personal injury or death.
To prevent injury, this device must be securely attached to the wall in accordance with the
installation instructions supplied with the mount. The mount must be secured to the Planar
Simplicity M Series display as noted below:

SLM43, SLM50, SLM55: Four M6-1.0 VESA mounting locations. 8mm - 10mm thread
engagement is required for secure mounting.

SLM65, SLM75, SLM86: Four M8-1.25 VESA mounting locations. 10mm - 15mm thread
engagement is required for secure mounting.
Select the correct screw/spacer combination for the mount.

Prior to installation, make sure you know where all of the mounting points are located.

Follow all safety precautions outlined in the VESA Installation manual.

Verify the parts received with the list shown in the VESA Installation manual.