Planar Systems Simplicity Series SLM50 50" UHD 4K Commercial Monitor - Manual (Page 33)

Operating the Display
Planar Simplicity M Series User Manual
020-1409-00D
Page | 33
15. Basic Remote Functions
15.1 Turning the Display On
1. Insert the power cord into the display and into the power outlet.
2.
Ensure the AC switch is set to “—“.
3. Press the power button on the remote or keypad.
15.2 Turning the Display Off
With the power on, press the power button on the remote or keypad to put the LCD panel in a
standby mode. To turn off power completely, turn the AC switch to “O” or disconnect the AC
power cord from the power outlet.
Note : If there is no signal for a certain period of time, the LCD panel will automatically go into
standby mode.
15.3 Adjusting the Volume
1. Using the remote, press the VOL- or VOL+ to increase or decrease the volume.
2. Pressing the MUTE button temporarily turns off all sound. To restore the sound, press
the MUTE button again.
Note : The analog audio out is variable. S/PDIF is fixed.
15.4 Selecting the Input Source
Press the SOURCE button on the remote or press the INPUT button on the keypad. Use the
arrow buttons to select one of the following input sources and press OK:
“HDMI 1, HDMI 2, DVI-
D, VGA, Media Player, Browser, CMS, Android, Android App”.
Note: When the display cannot find a source, a “No signal” message will appear.
Note: The app associated with the Android App source can be configured in the Android menu
under Settings -> Signage Display -> Source Settings. See page 65 for more information.
15.5 Navigating Through the Menus
1. With the power on, press MENU. The main menu appears.
2. Within the menu, use

, 
,

,

, and OK to navigate through the menus and
adjust options.
3. Press BACK to return to the previous menu. To exit the menu system, press HOME.