Eurotech Appliances ZEUS PXA270 User Manual

Page 65

Advertising
background image

ZEUS Technical Manual

Power and power management

© 2007 Eurotech Ltd Issue D

65

Battery backup

An on-board non-rechargeable coin cell battery (CR2032) provides a 3V battery

backup supply for the ISL1208 RTC, external SRAM and the supply supervisor, when

there is no +5V supply to the board. The ZEUS is normally shipped with battery

disconnected. See

JP2 – Battery disconnect

, page

93

, for details.

The table below shows the typical and maximum current load on the backup battery:

Device load on battery

Typical (µA)

Maximum (µA)

SRAM 0.3

3

ISL1208 RTC (with Clock Out Off)

0.4

0.95

Supply Supervisor

0.5

0.5

Total 1.2

1.45

An onboard Schottky diode drops 13mV from VBAT at +25°C (+77°F). At -40°C

(-40°F) this may increase to 170mV and at +85°C (+185°F) it may decrease

below 10mV. The SRAM and ISL1208 minimum voltages are 1.5V and 1.8V

respectively. Reliable operation below these minimum voltages cannot be

guaranteed.

Advertising