J3 – power connector (10-30v), See the section, J2 – power connector (5v – Eurotech Appliances ZEUS PXA270 User Manual
Page 78: Option), Cont, J2 – power connector (5v option), J2 – power connector, 5v option), J3 – power connector, 30v)
ZEUS Technical Manual
Connectors, LEDs and jumpers
© 2007 Eurotech Ltd Issue D
78
J2 – Power connector (5V option)
Connector:
Neltron 5566S-08, 8-way, 4.2mm (0.165") pitch mini fit header
Mating connector:
Molex 39-01-2085, 8-way, 4.20mm (0.165") pitch mini-fit, receptacle
housing
Mating crimps:
Molex 44476-1112
Pin Signal name
Pin Signal name
1 GND
5 +5V
2 GND
6 +5V
3 GND
7 +5V
4 +12V
8 NC
+12V connection is defined, but is not required for the ZEUS under normal
operation. It can be used to supply +12V to the PC/104 stack if required.
J3 is not fitted when J2 is fitted.
J3 – Power connector (10-30V)
Connector:
Kycon KPJX-4S-S, 4-way DC power socket
Mating connector:
Kycon KPPX-4P plug
Pin Signal
name
1 PWR_IN
2 IGNITION
3 GND_IN
4 GND_IN
J2 is not fitted when J3 is fitted.
1
3
2
4
As viewed from the front panel
1
5
4
8