Epson Stylus Parts CX5800F - Manual (Page 16)

Epson Stylus CX5800F
16 8/05
7. To delete a speed dial entry,
press the OK button. Then
press the u or d button, or the
3 key on the numeric keypad,
to display this option:
8. Press the OK button. You see the first speed dial entry
number (such as [1] ) and name displayed.
9. Press the OK button to delete this entry, or press the u or d
button to select a different entry and press the OK button to
delete it.
Printing Your Speed Dial List
1. Press the y Cancel/Back button to return to the first fax
screen.
2. Press the Setup button. You
see this display:
3. Press the u or d button, or
press the 2 key on the numeric
keypad, to display this option:
4. Press the OK button. You see
this display:
5. Press OK to print the speed dial list.
Sending a Fax
Before you fax, place your original document or photo on the
document table glass as described on page 7. Then send your
fax by manually entering a fax number, redialing the previous
fax number, or selecting an entry from your speed dial list.
Manually Entering or Redialing a Fax
Number
1. Press the Fax button once to
enter Fax mode. The Fax
button lights up and you see
this display:
2. Press the keys on the numeric
keypad to enter the fax
number. You can enter the
numbers 0 to 9 and the
characters * and #; up to 64
digits total.
Note:
If you need to change a character to the left, press the l button
to delete the character and re-enter it. Press the r button if you
need to move the cursor to the right.
If you want to redial the last fax number you used, press the
Redial/Pause button instead of entering a fax number. The
last fax number appears on the screen.
3. To send a black-and-white fax, press the x Start B&W
button.
To send a color fax, press the x Start Color button. (If the
receiving fax machine cannot print in color, the fax prints in
black-and-white.)
You see this display during
faxing:
Note:
If you need to cancel faxing at any time, press the y Cancel/Back
button.
4. After your original is scanned,
you see this screen:
If you do not need to fax another page, press the 2 key (for
No). The Epson Stylus CX5800F dials the fax number and
faxes your document.
Note:
If the fax number is busy or there is some other connection
problem, you see an error message and the Epson Stylus
CX5800F returns to the first fax mode screen. The Epson Stylus
CX5800F redials the number after one minute. Wait for the redial,
or check your connection and settings and try faxing again.
If you need to fax another page, press the 1 key (for Yes).
Open the document cover, remove your first original, place
your next original, and close the document cover. Then
press the
OK button to fax the next page. Repeat this step to
fax all the necessary pages. The fax connection stays open
until you’re finished.
Note:
If you’re sending a color fax, or a large document that fills up the
memory area, the Epson Stylus CX5800F scans and faxes one
page at a time. It then asks if you want to send another page.
Speed Dialing a Fax Number
1. Press the Fax button once to
enter Fax mode. The Fax
button lights up and you see
this display:
2. Press the Setup button. You
see this display:
3. Press the OK button. You see the first speed dial entry name
or number from your list displayed.
4. To fax to the first speed dial entry, press the OK button.
Then go to step 5.
To select a different speed dial entry, press the u or d
button to display the entry, or press the number key that
corresponds to the speed dial entry number. Press the
OK
button, then go to step 5.
5. To send a black-and-white fax, press the x Start B&W
button.
3.Delete Entry
1.Select Speed D
2.Print Report
1.Speed Dial Lis
Enter Fax Number
1234567890
Scanning 001 98%
Send another pag
Enter Fax Number
1.Select Speed D