Epson Stylus Parts CX5800F - Manual (Page 4)

Epson Stylus CX5800F
4 8/05
Memory Stick/ Compatible with Memory Stick
MemoryStick PRO Standard version 1.3 or Memory Stick
card slot Standard Memory Stick PRO Format
Specifications version 1.0 cards
SD/MMC Compatible with SD Memory Card
card slot Specifications / PART1. Physical Layer
Specification Version 1.0 cards and
MultiMediaCard Standard cards
xD-Picture Compatible with xD-Picture card Card
card Slot Specification Version 1.00 cards
Memory Card Image File Requirements
Media format DCF version 1.0 or 2.0 compliant*
File format JPEG, DOS FAT (FAT 12 or 16, one
partition) taken with a DCF version
1.0 or 2.0 compliant digital camera
Supports Exif version 2.21
Image size 80 × 80 pixels to 9200 × 9200 pixels
Number of files Up to 999
* DCF is the “Design rule for Camera File system” standard
Loading Paper
Single Sheets
1. Open the paper support and output tray, then slide out the
extensions.
2. Flip the feeder guard forward.
3. Slide the left edge guide to the left.
4. Insert the paper, printable side up, against the right edge
guide. Always load it short edge first, even for landscape
printing. Make sure the paper lies beneath the tabs and the
arrow mark on the left edge guide.
You can load up to 100 sheets of 17 lb plain paper and up
to 20 sheets of photo paper. (See page 6 for capacity
guidelines on other paper types.)
Letter-size
paper
4 x 6-inch or
5 x 7-inch, or
other paper
sizes