Epson Stylus Parts CX5800F - Manual (Page 22)

Epson Stylus CX5800F
22 8/05
5. Secure the ink cartridge holder (print head) to the case with
tape.
Caution:
Be sure to remove the tape after installing the printer in its new
location.
6. Close the scanner section, push in the output tray extension,
and close the output tray.
7. Repack the Epson Stylus CX5800F in the original box
using the protective materials that came with it.
Keep the Epson Stylus CX5800F level as you transport it.
After transporting the Epson Stylus CX5800F, remove the
tape securing the print head, plug in the Epson Stylus
CX5800F, and turn it on. If you notice a decline in print
quality, clean the print head (see page 18); if output is
misaligned, align the print head (see page 20).
Error Messages
Related Documentation
CPD-20212 Epson Stylus CX5800F Start Here sheet
CPD-20213 Epson Stylus CX5800F Basics Guide
CPD-20214 Epson Stylus CX5800F CD-ROM
(includes on-screen User’s Guide)
Display message Cause and solution
Paper out -> Load paper into
the sheet feeder, then press
the OK button. Load or reload paper in the sheet
feeder and press the
OK button to
continue. See page 4 for details.
Paper jam -> Press the OK
button. Remove any remaining
jammed paper by hand. See the User’s Guide for instructions
on clearing the paper jam.
[Cyan, Magenta, Yellow,
Black] ink low -> Press the OK
button to begin ink cartridge
replacement. Ink is low in one or more of the
indicated cartridges. See page 19 for
replacement instructions.
[Cyan, Magenta, Yellow,
Black] ink out -> Press the OK
button to begin ink cartridge
replacement. Ink is out in one or more of the
indicated cartridges. See page 19 for
replacement instructions.
No [Cyan, Magenta, Yellow,
Black] ink cartridge -> Press
the OK button to install a new
ink cartridge. An ink cartridge is not installed or is
installed incorrectly. See page 19 for
replacement instructions.
[Cyan, Magenta, Yellow,
Black] Ink cartridge error ->
Cartridge replacement is
necessary. Press the OK
button to begin. An ink cartridge that is not supported
by the Epson Stylus CX5800F is
installed. See page 19 for
replacement instructions.
No memory card A memory card is inserted that is not
supported by the Epson Stylus
CX5800F. Remove the incompatible
memory card. See page 3 for details.
No photos on memory card The inserted memory card does not
contain any valid images. See page 4
for a list of compatible card and image
types.
No index sheet detected or
sheet placed incorrectly.
Correct the sheet placement
and try again. An index sheet was not recognized
because it is not positioned correctly.
Align the top of the sheet with the left
edge of the glass. See page 10 for
details.
No photos selected or photos
marked incorrectly. Select
photos correctly and try again. No marks are detected on the index
sheet or the sheet includes more than
one mark for an image. Remove the
index sheet, mark it correctly, and try
again. See page 10 for details.
Memory card data does not
match index sheet. Replace
the card or index sheet and try
again. The index sheet does not match the
photos on the memory card. Remove
the card and insert the one used to
print the index sheet (see page 8), or
place the correct index sheet on the
glass (see page 10).
Paper thickness lever is set for
envelope printing. The paper thickness lever is set to the
^ H position. If you are printing on
envelopes, press x Start Color or
x Start B&W to continue.
Otherwise, set the lever to the
m L position.
Paper thickness lever is set for
printing sheets of paper. The paper thickness lever is set to the
m L position. If you are printing on
paper sheets, press x Start Color or
x Start B&W to continue. If you’re
printing on envelopes, set the lever to
the
^ H position.
Service required. See your
documentation for details. An Epson Stylus CX5800F part needs
to be replaced. Contact your local
authorized servicer or contact Epson
for a referral.
Printer error ->
or
Scanner error ->
See your documentation and
call service if necessary. There is a problem with the Epson
Stylus CX5800F. Turn it off and then
back on. If the error does not clear,
contact your local authorized servicer
or contact Epson for a referral.
Display message Cause and solution