Important: charging battery prior to use, Continued on next page – Estate E-SC 1102 User Manual
Page 11
Advertising
2.2
IMPORTANT: Charging Battery Prior to Use
Before beginning any electrical stages of installation we highly recommend charg-
ing the battery on the control board for 12 hours. This can be done anywhere there
is an outlet available.
1. Plug the battery into the control board (fig 1). For charg-
ing purposes it is not necessary to hook the receiver to
the battery or control board.
2. Insert the wires from the supplied AC transformer into terminal J2 of the Mas-
ter board which is to the left of the battery terminal and fuse (fig 2).
NEVER RUN 110V AC or POWER IN
THROUGH ANY OTHER METHOD
BESIDES THE PROVIDED TRANS-
FORMER TO THE CONTROL BOARD.
Fig 1
Fig 2
Master Unit Charging
Continued on Next Page
Advertising