Flash dimm replacement procedure, Figure b‐2 – Enterasys Networks 7S4280-19-SYS User Manual
Page 103
Memory Locations and Replacement Procedures
Enterasys NAC Controller Hardware Installation Guide B-3
Figure B-2 DIMM and DRAM SIMM Locations for the NAC Controller PEP (2S4082-25
shown)
Flash DIMM Replacement Procedure
1.
. Push the connector arms away from the DIMM and simultaneously lift the
DIMM enough to release it from the connector fingers.
Figure B-3 Removing the Existing DIMM
2.
Rotate the DIMM upwards, then remove it from the connector fingers.
1 Flash DIMM
2 DRAM SIMM
Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive electronic
equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones de
seguridad para evitar descargas de electricidad estática.
1 Connector arms
2 DIMM
3 Connector fingers
А
А
Б
В