Nac controller engine com port pinout assignments – Enterasys Networks 7S4280-19-SYS User Manual
Page 94
7C111 Chassis Specifications and Regulatory Compliance
A-4 Specifications and Regulatory Compliance
NAC Controller Engine COM Port Pinout Assignments
The COM port is a serial communications port for local access to Local Management. Refer to
for the COM port pin assignments.
DC Output Voltage
12v
DC Output Amps
5A
Physical
Dimensions
• Width: 10.65 in. (27.05 cm)
• Length: 7.3 in. (18.54 cm)
• Depth: 1.8 in (4.57 cm)
Predicted hours for Mean Time
Between Failures (MTBF)
For the MTBF hours for this module, refer to the MTBF web
site at URL
Maximum Wattage
50 Watts
Environmental
Operating Temperature
0°C to 40°C (32°F to 104°F)
Storage Temperature
-30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity
5% to 90% (non-condensing)
Minimum Air Flow
200 Linear Feet / Minute
Table A-5 NAC Controller Engine
Specifications (continued)
Item
Specification
Table A-6 COM Port Pin Assignments
Pin
Signal Name
Input/Output
1
Transmit Data (XMT)
Output
2
Clear to Send (CTS)
Input
3
Data Set Ready (DSR)
Input
4
Receive Data (RCV)
Input
5
Signal Ground (GND)
NA
6
Request to Send (RTS)
Output
7
Data Terminal Ready (DTR)
Output
8
Data Carrier Detect (DCD)
Input