JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 141)

APN
For specifying APN (Access Point Name).
* This item is grayed out and cannot be selected
if APN cannot be set for the adapter attached.
Caution :
0 The APN setting is written into the cellular
adapter, not this camera recorder.
Setting a wrong APN may result in
communication failure or expensive bills from
the telecommunications company. Set the APN
correctly.
Live Streaming Item
Live Streaming
Starts live distribution when “On” is selected.
[Setting Values: On, R Off]
Memo :
0 “On” cannot be selected if streaming is not
possible with the selected resolution, frame rate
and bitrate combination.
0 “On” cannot be selected if connection of the
selected network in [Interface] is not
established.
0 “On” cannot be selected when FTP is running.
0 Live streaming switches to “Off” when the power
is turned off.
9 Auto Restart
When the network is reconnected after
disconnection, live streaming will resume
automatically.
0 On:
Once the network is reconnected, live streaming
resumes automatically.
0 Off:
Live streaming does not resume automatically
even when the network is reconnected.
[Setting Values: On,
R
Off]
Memo :
0 When the power of the camera is turned off,
regardless of the settings in [Auto Restart], live
streaming does not begin automatically even
when power is turned on again and network
connection is established.
0 The setting cannot be changed during live
streaming (when live streaming is configured to
“On”).
Interface
For selecting the terminal for live streaming.
[Setting Values: R LAN, USB/Int. WLAN] u v
[Setting Values:
R
LAN, USB] w x
Server
For selecting the server for live streaming.
[Setting Values: R Server1, Server2, Server3,
Server4]
Memo :
0 The setting cannot be changed during live
streaming (when [Live Streaming] set to “On”).
9 Streaming Server
For setting the server for live streaming.
Memo :
0 The setting cannot be changed during live
streaming (when [Live Streaming] set to “On”).
9 Server1, Server2, Server3, Server4
* The name that is set in [Alias] is displayed
individually.
o Alias
For setting a name to distinguish the settings of this
camera.
The name set in this item will be displayed in the
[Server] options.
*1 The default value is “Server1/Server2/
Server3/Server4”.
*2 You can enter up to 31 characters and ASCII
characters.
o Type
For configuring the system for transferring video
and audio to be distributed.
[Setting Values:
R
MPEG2-TS/UDP, MPEG2-TS/
TCP, MPEG2-TS/RTP, RTSP/RTP, ZIXI, RTMP]
Memo :
0 Use reception devices that are compatible with
the respective transfer systems.
0 To use the “ZIXI” setting, a dedicated server is
needed separately.
0 The following items that can be set vary
depending on the setting of this item.
o Destination Address
For setting details such as the host name and the
IP address of the live distribution destination.
* Enter not more than 127 characters using
single-byte alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
Network Menu
141
Menu
Display and
D
etailed
S
etti
ngs