Emerson PD5500 - Manual (Page 10)

10
To repeat a single track, press the
REPEAT button ❶
once.
“REPEAT” will blink in the display.
Press the Skip/Search FWD. (
)
or REV. ( ) button ❷ to select
the specific track that you wish to
repeat. When the desired track
number appears in the display,
press the CD PLAY/PAUSE (❿ )
button ❸ to begin playback. The
specific track you selected will be
repeated continuously.
1
3
2
2
1
To cancel Repeat Playback,
press the REPEAT button ❶ until
“REPEAT” disappears from the
display. You can also cancel
Repeat Playback by pressing the
STOP (■) button ❷.
2
1
3
To repeat all of the tracks on a
disc continuously, press the
REPEAT
button ❶ twice.
“REPEAT” will appear in the
display. Press the CD
PLAY/PAUSE (❿ ) button ❷ to
begin all tracks repeat.
1
2
2
REPEAT PLAYBACK
Press the FUNCTION button to
select CD; CD will appear in the
display.
1
Press the CLOCK SET/MEMORY
button. “P-01” (program number),
“01” (track number) will appear
and “MEMORY will blink in the
display.
3
Open the CD Compartment door
and insert your disc in the CD
player. Close the CD compartment
door. Wait for the CD player to read
the table of contents and display the
total number of tracks on the disc.
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 20-track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
PD5500 O/M.QXD 7/9/01 4:35 PM Page 10