Emerson PD5500 - Manual (Page 12)

12
Plug a connection cable (not included) with 3.5mm plugs from the
LINE OUT jack on the external unit to this unit’s AUX input jack.
HELPFUL HINTS:
•
You could connect to the computer audio output to use this unit as
an amplified speaker system. Place the unit away from the monitor
to avoid interference.
• Headphone outputs such as those on a cassette player can be
connected. However, be sure to turn down the volume of the
cassette player before connection and adjust the volume of both
units to a desired level after power is turned on.
Headphone Out
Aux
1
Press the FUNCTION button to
select AUX; AUX will appear in
the display.
3
Press the POWER button ❶ to
turn the unit on, the display will
light. Set the VOLUME control ❷
to a low setting.
2
1
2
Turn the external unit on, and
start playback. Adjust the
VOLUME ❶ and BBS ❷ as
desired.
2
1
4
AUXILIARY PLAYBACK
By using an optional audio connection cable, sound from an external source can be heard through this portable
system. Before making any connections, turn off the power on both units.
PHONES JACK
For private listening, connect low impedance 32 ohm stereo headphones (not included) with a 3.5mm plug
to this jack. The speakers are automatically disconnected when the headphone plug is inserted in the jack.
PD5500 O/M.QXD 7/9/01 4:35 PM Page 12