Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) - Manual (Page 109)

rekordbox
109
En
[CROSSFADER] > [Cut Lag] setting
Adjust the Cut Lag on both edges of the crossfader.
Units of 0.1 mm can be adjusted from 0.3 mm to 5.5 mm.
• The default Cut Lag amount is 1.0 mm.
• This Cut Lag setting is a guide, and may not be exact.
[Booth Output] setting
Change whether or not the microphone sound comes out of the booth
channel.
If you don’t select
[Don’t output microphone sound to the Booth
output.] , the microphone sound comes out of the booth channel. If you
select the setting, microphone sound doesn’t come out of the booth
channel.
[Microphone Input] > [Talkover Mode] setting
Change Talkover mode.
• [Advanced] : Only the mid-range sound, other than the microphone
channel, is attenuated according to the set value of the Talkover
level.
Volume
Frequency