Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 37)

8. Move the 4-D encoder one step to the right to put the focus (the brackets) on the All Sub-
Types label that just appeared.
9. Press and hold the encoder.
10. Turn the 4-D encoder until Urban Kit is selected.
11. Move the 4-D encoder another step to the right to put the focus on the Results list.
12. Turn the 4-D encoder to scroll down the list and until EK-TL A KIT is selected.
13. Now press SHIFT + Button 4 above the displays so that +PATTERNS is deselected (the
Button must be off, this will be explained in more detail later):
14. Press the 4-D encoder to load the selected entry.
→ The drum kit is loaded into the Group A.
Alternatively, you can use the Knobs under each field at the bottom of the displays to select the
product, the type, sub-type, etc., in order to progressively narrow your search.
For the last step, let’s leave the Browser and get back to the default Control mode of your con-
troller:
► Press the lit BROWSER button to leave the Browser (the button turns off).
That’s it! You just loaded a drum kit into a Group. It is now ready to be played from the pads,
as you will see in the next section.
First Steps
Loading a Drum Kit from the Factory Library
MASCHINE - Getting Started - 37