Enterasys Networks XSR-3020 - Manual (Page 80)

Bootrom Monitor Mode Commands
3-36 Software Configuration
XSR-3020:bp
Enter current password:
Enter new password: ******
Re-enter new password: ******
Password has changed.
bu
This command updates the bootrom from a local file. You are prompted to enter data by the
following script. When the “
Proceed with erasing Bootrom in flash ...” statement appears,
enter y . Be sure not to interrupt the process or power down the XSR or it may be affected
adversely. After you have updated this file, you can delete it from Flash to conserve space for
other files.
XSR-3020: bu btXSR3000_1_2.fls
Verifying btXSR3000_1_2.fls file ...
bootFirst size=28992 sum=0xc2e5 compressed_size=28992 entry=0x80020000
bootrom size=842656 sum=0xfa65 compressed_size=347728 entry=0x81e00000
OK
Proceed with erasing current Bootrom in flash and replace with btXSR3000_1_2.fls?
(y/n) y
First copy of Bootrom ...
Erasing 3 sectors at address=0xbfc20000
Programming 131072(0x20000) bytes at address 0xbfc20000
Programming 131072(0x20000) bytes at address 0xbfc40000
Programming 85600(0x14e60) bytes at address 0xbfc60000
Verifying Bootrom flash sectors
Locking 3 Bootrom flash sectors
Second copy of Bootrom ...
Erasing 3 sectors at address=0xbfca0000
Programming 131072(0x20000) bytes at address 0xbfca0000
Programming 131072(0x20000) bytes at address 0xbfcc0000
Programming 85600(0x14e60) bytes at address 0xbfce0000
Verifying Bootrom flash sectors
Locking 3 Bootrom flash sectors
***** Bootrom update completed. *****
bU
This command updates the bootrom through a network transfer to a local file. Be sure to enter the
U in uppercase. After you have updated this file, you can delete it from Flash to conserve space for
other files.
cd
This command changes the current directory in the file system to flash: or cflash: .