Epson 1240U - Manual (Page 55)

50
Using the Transparency Unit
2. Load the slide or film with the base side down on the scanner’s document table in
the transparency unit window, as shown below.
3. Close the transparency unit.
Leave the narrow calibration window
uncovered, otherwise the colors in your
scans will be affected.
Make sure the unit is completely closed,
otherwise an option error results and you
will not be able to scan the document or get
correctly colored images.
make sure this window is
clean and uncovered
basics.book Page 50 Tuesday, October 24, 2000 9:53 AM