ELAN Home Systems V883 - Manual (Page 14)

E L A N H O M E S Y S T E M S
Page 12 © ELAN Home Systems 2006 • All rights reserved.
V883 INSTALLATION MANUAL
©
3. Video Connections
Wiring
Use high-quality component video cables to make connections between sources and
the V883’s inputs. Sources will typically be located near the V883 at the head-end of
the system. Component video outputs will typically be sent via RG-6 coaxial cable
from the head-end to televisions and/or monitors located throughout the house. Use
F-to-RCA adaptors to connect high quality component video cables to each TV or
monitor, as shown below. Maximum coaxial wire run is 300 feet.
Front
Rear
To
TV/Monitor
Component Video
Inputs
To
V883 Component
Video Outputs
RG-6 Coaxial
Cable
(300 Ft. Max)
Front
Rear
F-to-RCA
Adaptor
F-to-RCA
Adaptor
Coaxial
Wall Plates
Component
Video Cables
Component
Video Cables
Y
P B
P R