Setup/ip-router-module – ELSA Cable User Manual
Page 102
Description of the menu options
ELSA MicroLink Cable
R94
The entries in the ARP table might, for example, have the following appearance if
different devices with different IP addresses (192.168.139.20, 192.168.130.30)
communicated with the router:
ARP-aging-min.
This option allows you to enter a time (from 1 to 99 minutes) at the end of which the ARP
table is automatically updated, i.e. all IP addresses that have not been accessed since
the last automatic update are removed. The default setting is 15 minutes.
TCP-aging-min.
If data transfer stops during a TCP connection to the router, e.g. if the user does not enter
any more data during the remote configuration, it will automatically release the TCP
connection on expiry of the time entered here. Possible settings are from 1 to 99 minutes;
The default setting is 15 minutes.
TCP-max.-conn.
The maximum number of allowable connections possible at the same time can be set
here. DEFAULT setting is '0', meaning the same as “any number“.
Setup/IP-router-module
This section describes the functions of the cable modem as an IP router. References in
the following text to 'routers' thus refer to the cable modem in its IP router operating
mode.
This menu allows you to enter settings for the IP router module. The menu has the
following layout:
Operating
This option allows you to activate or deactivate the IP router module. In the default
configuration, the IP router module is activated.
Activating the IP router module also activates the TCP/IP module.
IP-address
Node-ID
Last-access
Connect
192.168.130.20
0000c0717860
6780443 tics
local
192.168.130.30
0800091eebf4
6214514 tics
local
/IP-router-module
IP router module settings
Operating
Activates or deactivates the IP router module.
IP-routing-table
Router table for IP network and remote station assignment
Loc.-routing
Activates/deactivates local routing
Routing-method
Routing method for IP packets
RIP-config
Settings for IP-RIP operation
Masquerading
Settings for IP masquerading
Firewall
Settings for firewall functions