Bushnell Prime Low-Glow Trail Camera Kit (Gray) - Manual (Page 12)

12
EXAMPLES-Changing the Settings of Some Common Parameters
Following this page, you will find tables listing all of the parameters found in the
SETUP Menu, along with their possible settings (or range of settings), and a
detailed description of what the parameter controls and what the settings do. If you
read the previous section detailing how to select parameters and change their
settings, you should be able to dive right in, find the parameter(s) you want, and
setup the camera to your preferences. But maybe you’d rather walk through an
example or two first:
To change any parameter’s setting, always start with the power switch in the AIM
position. After the LCD comes on, press the MENU key.
The first parameter you will see when you enter the SETUP Menu is “Set Clock”. As
the Time Stamp feature is “On” by default, the camera will normally imprint the date
and time on each photo or video, based on your settings here. Press
OK and use
the UP/DOWN keys to set the hour (24- hr format, “00”=midnight, “12”=noon), then
press the RIGHT key move to the minute field and set it (again using UP/DOWN ).
Press RIGHT to move to the lower row and set the year, month and date using the
same method. When finished, press the OK key to confirm the new time and date
settings you made.
Now press the RIGHT key to move to another parameter in the Menu. The next
parameter you will see is “Mode”. To change it from its default setting of “Camera”
(still photos) to “Video” (shoot video clips), press the
DOWN key to select the
“Video” setting. Press the OK key to “Execute” (Set) the new setting you’ve selected
for this parameter.
Now press the RIGHT key to move to another parameter in the Menu. Pressing
it 2 times will take you to “Additional Set”. Try using the
UP and DOWN keys to
choose to turn ON / OFF the “Additional Set”. You will get to the full suite of
settings if you turn the “
Additional Set ” on.
Field Scan 2x with Live Trigger Feature
Field Scan is a revolutionary new feature for the Bushnell Prime Trail Camera ,
which allows you to monitor your food plots or field edges with time lapse images.
When set to “On”, the
Prime Trail Camera will take a photo automatically at your
choice of intervals (for example, once every five minutes) during one or two blocks
of time you set up for each day,
without requiring a trigger from an active animal.
This has the advantage of giving you the ability to monitor the edge of a field that
might be 50 or 150 yards away from the camera out of the PIR sensor’s