Eclipse - Fujitsu Ten CD5444 - Manual (Page 104)

104
How to operate the Sound Adjustment Mode
Making fine adjustments to the parametric equalizer
You can select and adjust frequencies using the parametric
equalizer (single-band).
Turn the [SEL] button to select EQ and press the [SEL]
button.
Press the [SEL] button for more than one second.
The mode will change to parametric equalizer adjustment
mode.
Turn the [SEL] button to select the frequency for
changing the parametric equalizer settings.
When the button is turned, the frequency changes in the
following order.
80Hz ↔ 125Hz ↔ 200Hz ↔ 315Hz ↔ 500Hz ↔ 800Hz ↔
1.25kHz ↔ 2kHz ↔ 3.15kHz ↔ 5kHz ↔ 8kHz ↔ 12.5kHz
Press the [SEEK /FAST ] button.
This adjusts the frequency level.
[SEEK
] button: Increases level.
[FAST ] button: Decreases level.
4
3
2
1
ATTENTION
When the following operations are carried out, the parametric
equalizer settings that have been made previously will be
changed.
[SEL] button [FAST ] button
[SEEK ] button