Eclipse - Fujitsu Ten CD5444 - Manual (Page 45)

45
Basic operation
[AUDIO CONTROL] button
You can set different volume levels for each audio mode. The
volume for the initial FM mode (default value: 40) is used as a
reference for storing the differences in volume that have been
set for each audio mode. When SVC is set, the volume level
can change as shown in the example settings in the table
below.
SVC (Source Volume Control) Mode
FM AM CD Memory Stick Audio mode
Reference
(40)
* : The volume levels can be set to a maximum of 80 and a
minimum of 0. If you try to go past the maximum or minimum
volume level, the level will not change. For the CD changer,
SVC adjusts the volume using the setting value for the CD
player.
0
(40)
0
(40)
0
(40)
Default value
(Volume level)
Reference
(40)
SVC setting
value
+15 (55)
SVC setting
value
-10 (30)
SVC setting
value
+5 (45)
SVC setting
(Volume level)
45 55 ➔ 60 30 ➔ 35 45 ➔ 50
When volume level in
FM mode is adjusted
from 40 to 45
45 ➔ 70 60 ➔ 80* 60 50 ➔ 75
When volume level in
CD mode is adjusted
from 35 to 60
70 ➔ 5 20 60 ➔ 0* 75 ➔ 10
When volume level in
AM mode is adjusted
from 80 to 20
5 ➔ 30 20 ➔ 45 0 ➔ 20 35
When volume level in
Memory Stick mode
is adjusted from 10
to 35
Setting examples: