Eclipse - Fujitsu Ten CD5444 - Manual (Page 50)

50
Basic operation
The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may be
disabled in the following procedure:
Turn the [SEL] button to select GUIDE TONE.
Press the [SEL] button.
The Guide Tone Mode will be switched ON/OFF.
Turn the [SEL] button to select ON or OFF.
Press the [RTN] button.
At this time, other adjustments can also be made in
function mode.
Press the [FUNC] or [RTN] button to exit function mode. 5
4
3
2
1
Disabling the guide tone feature (for button operation)
Switches the clock display to ON/OFF.
Turn the [SEL] button to select CLOCK DISP.
Press the [SEL] button.
The clock display ON/OFF mode is activated.
Turn the [SEL] button to select ON or OFF.
Press the [RTN] button.
At this time, other adjustments can also be made in
function mode.
Press the [FUNC] or [RTN] button to exit function mode. 5
4
3
2
1
Clock display on/off
[FUNC] button
[SEL] button
[RTN] button