Epson EL 486UC - Manual (Page 127)

J
Jumpers
cache, 3-8, 3-23
changing settings, 3-6, 3-9
CPU, 3-8
diskette drive assignment, 1-12,
3-8, 4-18
display adapter, 6-6
four-pin, 3-9
game port, 3-7
hard disk drive, 4-2, 4-17, 6-8
location, 3-5
main system board, 3-5, 3-7
option card(s), 3-14, 3-16, 6-11
port settings, 3-7
processor type settings, 3-8
reassigning diskette drive, 1-12,
3-8, 4-18
three-pin, 3-9
two-pin, 3-9
video card, 3-14, 6-6
K
K/B, 1-3
Key disk, 2-5, 6-10
Key-way, 4-16
Keyboard
checking connections, 6-5
connecting, 1-3
errors, 6-5
num lock, 1-17, 6-5
option, 1-17
port, Intro-1, 1-3, A-2
problems, 6-5
processor speed command, 2-5, A-1
PS/2 compatible, Intro-1, A-2
reconnecting, 3-4
Keypad, numeric, 1-17, 2-5,6-5
Keys, SETUP function, 1-10
L
LAN card, Intro-1
Location, choosing, 1-1
Lotus 1-2-3 drivers, 5-3
Low-level format, 6-9
M
Main system board, see System
board
Mass storage, Intro-1, Intro-3, 4-1,
A-3
Master hard disk drive, 4-17
Math coprocessor, Intro-3, 1-11
MDA (monochrome display
adapter), 1-17
Memory
addresses, 1-11,1-20
base, 1-16
cache, Intro-1, Intro-3, 3-22-24, A-1
clearing, 2-3
CMOS RAM, 1-9, A-2
conventional, 1-16
count, 1-8
extended, 1-16
installing, Intro-3, 3-10
insufficient, 6-10
modules, see SIMMs
problems, 6-12
RAM, Intro-1, 1-16, A-1
remapping option, 1-19
removing, 3-13
reserved, 1-11
ROM, 1-9, 1-11, 1-19, A-1
SIMMs, see SIMMs
size, 1-16
standard, A-1
system, Intro-1, Intro-3, 1-16, A-1
video, see Video memory
Messages, error, 1-8, 6-5, 6-7-9, 6-13
Metal shutter, 2-1
MGA (multi-mode graphics
adapter), 1-17
Microprocessor, see CPU
Index 5