Installing the hard disk on the mounting bracket – Epson EL 486UC User Manual

Page 83

Advertising
background image

7. Slide the bracket toward the side of the computer, as shown

below, until the tabs hold the bracket in place.

8. Secure the mounting bracket with a screw on each side, as

shown above.

Installing the Hard Disk On the Mounting Bracket

You can install a hard disk drive on top of the mounting bracket

rather than under it. Refer to the illustration

of

the mounting

bracket on page 4-8 and the one below while following these steps:

1. Remove the screw securing the mounting bracket to the base

of the computer and slide the mounting bracket toward the

diskette drive bays until the slots clear the tabs. (See the

illustration on page 4-8.)

4-10

Installing and

Removing Drives

Advertising