EnGenius Technologies SHOPMASTER 28-248 - Manual (Page 8)

8
1
2
3
4
5
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from
all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,
gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax.
1. Remove the cardboard box from the packing skid (A) Fig. 1.
2. Use a 3/8" wrench to remove the two bolts (B) Fig. 1 that attach the motor to the packing skid.
3. Remove the bolts that attach the stand (C) Fig. 2 and the saw (D) to the the packing skid (A) with a 1/2" wrench.
A B
D C
A
Fig. A Fig. B
1. Saw
2. Stand
3. Dust
Chute
4. Top Plate
5. Stand Door
6. Motor and key (A)
7. Table
8. Belt
9. On/Off
Switch
10 Motor Bracket (2)
11. Dust Spout
12. Blade
13. Table Insert
14. Motor Pulley
6 K
E
Y 7 8
9 10
11
12
13 14
NOTE: LVC box and hardware are included with certain
models.
1
2
3
4
5
CARTON CONTENTS
Fig. C
Fig. D